Operation procedures:
- Monitor the alternator gauges and indicators, including voltage and frequency.
- Monitor the fuel level and add more fuel as needed.
- Check the oil level regularly and add more oil as needed.
- Run the generator at the recommended load and avoid overloading it.
- Allow the generator to cool down before turning it off.
Maintenance procedures:
- Change the oil and oil filter regularly, according to the manufacturer’s recommendations.
- Replace the air filter and fuel filter as needed.
- Check and clean the spark plug regularly.
- Check and replace the battery as needed.
- Check and tighten all screws and bolts on the alternator.
- Schedule regular maintenance and inspections by a qualified technician.
It is important to follow the manufacturer’s recommendations for the specific generator used and refer to the owner’s manual for any additional instructions or procedures.
Pre-operative procedures:
- Inspect the alternator for any signs of damage or malfunction.
- Check the fuel level, oil level, and coolant level.
- Check the battery and make sure it is fully charged.
- Verify that the alternator is properly grounded.
- Check the exhaust system for proper installation and ventilation.
- Starting procedures:
- Turn on the fuel valve.
- Turn on the battery switch.
- Press the start button or pull the recoil start.
- Let the engine warm up for a few minutes.
Starting procedures:
- Turn on the fuel valve.
- Turn on the battery switch.
- Press the start button or pull the recoil start.
- Let the engine warm up for a few minutes.
